Versatile capabilities of the ROLL single disc grinding machines and high area efficiency stays in the foreground of development of the ROLL special discs.

With the wide range of accessory discs you reach a high area efficiency with the single disc grinding machine on any surface. ROLL offers for every surface the perfect disc!

For abrasive discs. With exchangeable rubber covering.Wrench and fixation screw included. 4,25 kg.

Article: 19.14211 (Ø 380mm)

Article: 19.14212 (Ø 410mm)

Spare rubber covering

Article: 52.00391

Spare wrench 12mm

Article: 52.00394

Spare fixation screw M25

Article: 52.00393

For floor cleaning pads, with exchangeable spiked plate.

Article: 19.15340

For grinding cement bonded surfaces, screed, anhydrite, coatings.

Very aggressive with long service life. The harder the surface the more efficient works this Diamond disc.
With 5 rotating two-rowed diamond discs Ø 125mm.
Steel disc Ø 400mm, 12,5kg.

Article: 19.14320

Application videos

For removing rough remainders of elastic adhesives, felt, bitumen, ceramic tile adhesives, loose and full surface filler. For removing of coatings and sintered layers. For roughening screeds. A real problem solver for all surface preparation work, even on large areas. Weight 18 kg.

6 x 2 PCD-cutters with very long service life. Spring mounted.
Depth of engagement of PCD cutters adjustable with spacer blocks.

Article: 19.14370

Application videos

For removing rough remainders of elastic adhesives, felt, bitumen, ceramic tile adhesives and loose filler. For removing of coatings and sintered layers. For roughening screeds. Weight 18kg.

6 x 2 PCD-cutters with very long service life. Spring mounted.
Depth of engagement of PCD cutters adjustable with spacer blocks.r.

Article: 19.14350

For removing resinous substances, adhesives, remainders of floor coverings, felt and rubber. Very efficient also on large areas. Works like a big scraper.

With 12 carbide cutters (which run on springs), they cut on the bottom side and on the outside. You can use them twice, just turn. Steel disc Ø 400mm, weight 18,5kg.

Article: 19.14325

Application videos

For removing resinous substances and remainders of floor coverings especially with woven back. Works like a big scraper.

With 6 carbide cutters (which run on springs). You can use cutters 4 times.
Steel disc Ø 400mm, weight 14,5kg.

Article: 19.14322

For sanding wooden floors, parquet and cork, for finish sanding and for renovating.
For sanding before varnishing and sealing. 4 discs Ø 150mm run on high quality bearings,

screwed on a steel disc, discs are with soft underlay for velcro sanding paper,

they turn due to rotation of the machine.

Efficient disc with high sanding removal.
On steel disc Ø 400mm, weight 21 kg.

Article: 19.14500

Application videos

For rough grinding of cement bonded surfaces. For grinding paint, coatings, lacquer.
Very aggressive due to the rotation of the discs and the weight of the disc – 15kg.
With 5 rotating split discs Ø 127mm, grit 14, on steel disc Ø 400mm.

Article: 19.17160

Spare carbide disc grit 14

Article: 19.17165

For universal use! For rough grinding of cement bonded surfaces, sintered surfaces.
For grinding of paint and coatings. For grinding slightly uneven surfaces.

Grit 14

Article: 19.17180

Grit 10

Article: 19.17182

Grit 6

Article: 19.17181

For grinding spackle, screed and adhesive films. More efficient than abrasives.
Double sided metal disc Ø 400mm.
Used with drive disc 19.14211 /12.

Grit 10

Article: 19.17125

Grit 14

Article: 19.17130

Grit 24 (screed)

Article: 19.17135

Grit 36 (spackle)

Article: 19.17140

For smoothing wet concrete. Steel disc 600mm with edges bent up slightly, weight 10kg.

Article: 19.14183

For cleaning contaminated industrial floors.
Nylon brush with abrasive grits.

Article: 19.15305

Universal cleaning brush for shops, entrances etc.
For tiles and synthetic floor coverings.
Polypropylene fibre 0,7mm.

Article: 19.15310